| Riwayat Penelitian |
|---|
| 1. | Kekuatan Tekan Sejajar Serat dan Tegak Lurus Serat Kayu Ulin (Bersama Yosafat Aji Pranata) | 2017 |
|
| 2. | Distortion Energy Criterion for Estimating Dowel Bearing Streght of Timber Member Loaded at Angle (bersama J.A. Tjondro, Lie Ting Hwe, dan Clemen) | 2017 |
|
| 3. | Numerical study on alternate block shear failur mode of structural tee section loaded in tension (bersama Hendy Wijaya) | 2017 |
|
| 4. | Numerical study on lateral-torsional buckling of honeycomb beam (bersama Danny Gunawan) | 2017 |
|
| 5. | Shear modulus prediction of three-ply cross-laminated kapur wood beams from shear moduli of individual laminae (bersama Belen Mustamin) | 2017 |
|
| 6. | Non-linear Compression Stress-Strain Curve Mode for Hardwood (bersama Johannes Adhijoso Tjondro dan Iswandi Imran) | 2017 |
|
| 7. | Sambungan Balok-Kolom Eksterior Kayu Gulam Akasia dengan Sistem Profil Siku dan Batang Baja (bersama Djoni Simantan dan Johannes Adhijoso Tjondro) | 2017 |
|
| 8. | Studi Eksperimental Geser Blok pada Batang Tarik Kayu Indonesia (bersama Nessa Valiantine Diredja) | 2017 |
|
| 9. | Correction factor in the Determination of Moduli of Elasticity of Orthotropic Material Using Ultrasonic Longitudinal Wave Propagion Method. | 2017 |
|
| Publikasi ilmiah |
|---|
| 1. | Kekuatan Tekan Sejajar Serat dan tegak Lurus Serat Kayu Lilin, 2014, Makalah Penelitian ditulis bersama Yosafat Aji Pranata diterbitkan di Jurnal Teknik Sipil Vol.21 No.1 (April 2014 13-22. |
|
| 2. | istortion Energy Criterion for Estimating Dowel Bearing Strength of Timber Member Loaded at Angle, 2015, Makalah penelitian ditulis bersama J.A. Tjondro, Lie ting Hwe, dan Clemen, disajikan dalam 58th SWST International Convention, 7-12 juni 2015 di Jackson, Wyoming, USA |
|
| 3. | Numerical study on alternate block shear failure mode of structural tee section loaded in tension, 2016, makalah penelitian ditulis bersama Hendy Wijaya, disajikan dalam Sustainable Civil Engineering Structures and Construction Materials (SCESCM 2016), Bali, September 2016. |
|
| 4. | Numerical study on lateral-torsional buckling of honeycomb beam, 2016, Makalah penelitian ditulis bersama Danny Gunbawan, disajikan dalam Sustainable Civil Engineering Structures and Construction Materials (SCESCM 2016), Bali, september (invited speaker) |
|
| 5. | Shear Modulus Prediction of three-ply cross-laminated kapur wood beams from shear moduli of individual laminae, 2016, Makalah Penelitian ditulis bersama JUlius Belen Mustamin, disajikan dalam Sustainable Civil Engineering Structures and Construction Materials (ECESCM 2016) Bali, September 2016 |
|
| 6. | Non-Linear Compression Stress-Strain Curve Mode for Hardwood, 2016 Makalah Penelitian ditulis Bersama Johannes Adhijoso Tjondro dan Iswadi Imran, Jurnal Teknik Sipil Mekanika Vol 1, No 1 |
|
| 7. | Sambungan Balok-Kolom Eksterior Kayu Glulam Akasia dengan Sistem Profil Siku dan Batang Baja, 2016, Makalah Penelitian ditulis Bersama Djoni Simanta dan Johannes Adhijoso Tjondro, Jurnal Teknik Sipil Mekanika, Vol 1, No 1 |
|
| 8. | Studi Eksperimental Geser Blok pada Batang Tarik Kayu Indonesia, 2016, Makalah Penelitian ditulis Bersama Nessa Valiantine Diredja, terbit di Jurnal Tehnik sipil, Fakultas Tehnik Universitas Kristen Maranatha , Vol 12 No 2 |
|
| 9. | Development of Acacia Glulam Wood Exterior Beam-to-Column Connection With Angles Johannes Adhijoso Tjondro, akan Disajikan di The 6th International Conference on Euro Asia Civil Engineering Forum, Seoul, Agustus 2017 |
|
| 10. | Correction Factor in the Determination of Moduli of Elasticity of Orthotropic Material Using Ultrasonic Longitudinal Wave Propagation Method, 2017, Makalah Penelitian akan disajikan di 20th NDT and Evaluation of Wood Symposium, Madison, Wisconsin, USA, September 2017 |
|
